National Safety Inspections All Articles
Regulatory Compliance

The Charger Outside the Fire Door: Why EV Infrastructure Belongs in the Safety Case

By National Safety Inspections Regulatory Compliance
The Charger Outside the Fire Door: Why EV Infrastructure Belongs in the Safety Case

Photo: Christine Johnstone , CC BY-SA 2.0, via Wikimedia Commons

Across UK office parks, depots and industrial estates, workplace electric vehicle charging has moved from a sustainability gesture to routine infrastructure. In many organisations the project is managed as an electrical works package: a contractor installs the charge points, the fixed wiring is certified, and the car park is handed back. The fire risk assessment, however, may never be reopened.

That separation is becoming harder to defend. A charge point is not an isolated appliance. It is part of the building's electrical distribution, its parking layout, its emergency arrangements and its insurance profile. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must make a suitable and sufficient assessment of fire risks on the premises. The Fire Safety Act 2021 clarified the scope of that duty in relation to premises and parts of premises. Workplace charging is precisely the kind of change that can alter the assessment without changing the building's footprint.

When a car park project becomes a safety case change

An EV charger brings associated distribution boards, cabling, isolation devices, signage, cable management and often collision protection. It also changes how vehicles occupy the site. Overnight fleet charging may mean vehicles are left unattended for long periods. High-power charging may concentrate electrical load in one area. Cables may cross pedestrian routes. A charger may sit close to an exit, a fire compartment wall, a storage area or the only practical route for firefighters.

None of these details is necessarily a problem. The problem is treating them as invisible to the fire risk assessment. The assessment should describe what is installed, where it is, how it is controlled and what happens when something goes wrong. If the document still describes a car park with no charging infrastructure, it is no longer a reliable account of the premises.

Thermal runaway and the limits of familiar assumptions

Lithium-ion battery fires are not simply petrol fires with a different fuel. A damaged or defective cell can enter thermal runaway, a self-sustaining chain of heat generation that produces flammable and toxic gases and can reignite after apparent extinguishment. The energy remains in the battery. Conventional assumptions about quick knockdown, cooling and safe removal may not hold.

For a workplace, the practical questions are local. Could a single vehicle fire in the car park affect an exit, a boundary, a sprinkler system or a nearby building? Is there detection? Is there ventilation? Can the fire service gain access and identify the isolation point? If several vehicles are charging in a confined area, what is the emergency plan? The fire risk assessment does not need to turn every duty holder into a battery scientist, but it does need to consider credible scenarios and set out proportionate controls.

The inspection gap between fixed wiring and fire safety

An electrical installation certificate confirms that the fixed wiring met BS 7671 at the time of testing. An EICR provides a periodic condition report. Neither document, on its own, answers the fire safety questions. It will not tell the responsible person whether the charger is protected from vehicle impact, whether the charging cable creates a trip or obstruction hazard, whether the emergency isolation point is visible and accessible, or whether the fire action plan accounts for the equipment.

That is why inspection should verify EV infrastructure alongside the fixed wiring certificates. The assurance trail should include the charger asset register, commissioning documents, operation and maintenance information, the maintenance regime and fault records. Cable management should be designed rather than improvised. Trailing leads across walkways, damaged cables and daisy-chained domestic extensions are warning signs. Collision protection such as bollards, wheel stops or barriers should match the vehicle movements on site. Signage should identify the equipment and, where provided, the emergency isolation arrangements.

Isolation deserves particular attention. A labelled isolator that is locked in a plant room, hidden behind stored pallets or known only to one contractor is not an emergency control. The fire risk assessment and emergency plan should make clear who may isolate, where the point is and how that information reaches the fire and rescue service. The insurance position should also be checked. Insurers increasingly ask about EV charging, and a material change that is not disclosed can complicate cover.

A proportionate assurance route

The starting point is a map: every charge point, its associated distribution equipment, its isolation point and its relationship to exits, boundaries and fire compartments. The fire risk assessment should then be reviewed by someone competent to consider both fire safety and the electrical installation, with input from the electrical contractor where needed. The emergency plan, maintenance schedule, contractor induction and staff instructions should follow.

This is not an argument for gold-plating every workplace charger. It is an argument against pretending that the car park is outside the safety case. As charging becomes ordinary, the assurance should become ordinary too: recorded, reviewed and joined up with the building's wider fire safety arrangements.